Repair solid surfaces

This standard covers the skills and knowledge required to repair solid surfaces. It covers measuring and marking out repair areas, routering out damaged areas, adding new solid surfaces and sanding and

1. comply with health and safety requirements and procedures at all

   times

   2. obtain specifications and requirements following standard

   operating procedures

   3. obtain equipment and materials required following standard

   operating procedures

   4. check equipment is set up correctly and in good working order

   following standard operating procedures and any manufacturer's

   instructions

   5. check materials required meet specifications and are free from

   faults following standard operating procedures

   6. measure and mark out repair areas following company

   procedures and manufacturers' instructions

   7. repair areas to meet specifications

   8. sand and finish repaired areas following company procedures and

   manufacturers' instructions

1. relevant health and safety responsibilities

   2. meaning of terms used in specifications

   3. how to check equipment is set up and is in good working order

   4. how to check materials and the common faults that can occur

   5. why it is important to select appropriate tools, equipment and

   edging methods according to the manufacturers' instructions

   6. different repair methods

   7. re-finishing techniques

   8. how to evaluate ease of repairs

   9. how to measure and mark out repair areas

   10. how to sand and finish solid surfaces