Preparing coating materials for application on yachts and boats
Overview
This standard identifies the competences you need to prepare coating materials (paints) for application by brush, roller or spray on yachts or boats, in accordance with approved procedures. You will be required to access the appropriate contractual and coating manufacturers' specifications and to extract all information necessary to carry out the preparations of the coating materials. You will be expected to select the appropriate preparation or mixing equipment and to ensure that it is fit for purpose. You will be expected to prepare a variety of coatings for a range of applications, which will include the painting of bare substrates and the overcoating of previously painted surfaces. You will be required to check that all paint has been prepared in accordance with manufacturers recommendations for the application conditions
Your responsibilities will require you to comply with your organisation's policies and procedures for the preparation of the coating materials and for the disposal of surplus product, arisings and contaminated solvents. You will be required to report any problems with the preparation activities that you cannot resolve, or are outside your defined authority, to the relevant people. You will be expected to work with a minimum of supervision, taking personal responsibility for your own actions and for the quality and accuracy of the work that you undertake.
Your underpinning knowledge will provide a good understanding of your work and will provide an informed approach to the preparation of liquid coatings used on yachts or boats. You will understand the properties of the coatings and the applications for which they are intended. You will know about pot life, induction times, viscosity and temperature conditioning requirements, in sufficient depth to provide a sound basis for carrying out the activities, correcting faults and ensuring that the coatings are prepared to the required standards.
You will understand the safety precautions required when carrying out the preparatory operations. You will be required to demonstrate safe working practices throughout and will understand the responsibility you owe to yourself and others in the workplace.
Performance criteria
You must be able to:
- work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- obtain the required materials and check them for quantity and quality
- determine how the materials need to be prepared
- carry out the preparations using suitable equipment
- report completion of preparations in line with organisational procedures
- deal promptly and effectively with problems within your control and report those that cannot be solved
- complete relevant documentation in line with organisational procedures
Knowledge and Understanding
You need to know and understand:
- the safe working practices and procedures to be observed when working with yacht or boat surface coating materials and mixing equipment (such as general workshop and site safety, protecting other workers from the effects of the work, atmospheric controls)
- how to recognise and deal with emergencies and the procedures to be followed (such as methods of safely evacuating and closing down of compartments in the case of fire or other major incident, first aid, fire fighting and resuscitation of personnel)
- Statutory requirements, risk assessment procedures and relevant requirements of HASAWA, COSHH (such as The Provision and Use of Work Equipment Regulations, Control of Vibration at Work Regulations, The Special Waste Regulations, The Pollution Prevention and Control Regulations, The Water Resources Act, The Solvent Emissions Directive)
- the hazard associated with the storage of, the preparation of, and the disposal of yacht or boat coating products and solvents
- the information to be found in manufacturers' data sheets and in Chemical Hazard information and packaging for supply (CHIPS) data sheets
- the use of appropriate personal protective equipment (PPE)
- the environmental impact of the operations you are carrying out and with the materials you are using and the minimisation of this impact
- the hazards associated with carrying out coating material preparation activities and with the materials and equipment used (such as inhalation of fumes, fire and explosion, contact with solvents and other chemicals) and how they can be minimised
- the characteristics of and applications for yacht and boat coating products
- product 'life', stock control and the use of batch numbers
- the storage requirements, including environmental controls and containment arrangements, for the coating products and solvents (such as thinners, cleaners)
- the estimation of the product volume to be prepared for a defined usage (including estimation of areas to be covered, practical paint consumption and loss factors)
- the containers appropriate to defined products and usages
- the preparation requirements, including pot-life, induction times and temperature conditioning requirements
- the importance of stirring single pack paints and epoxies (settling of pigment) and use of thinners, for coating products
- the importance of mixing ratios (such as use of whole packs) for two-pack products
- the need to reject wrongly mixed paint
- the use of appropriate containers, hand tools and electro-mechanical/pneumatic equipment
- the disposal procedures for redundant materials
- the appropriate procedures for the disposal of, or the cleaning of, used containers
- the procedures to contain and to clear away spillages and the appropriate disposal of the arisings
- the quality control requirements and techniques to be followed
- the importance of the maintenance of records of paint and solvent consumption
- the extent of your own responsibility and to whom you should report if you have problems that you cannot resolve
Scope/range
Scope Performance
Carry out all of the following during the preparation of the coating materials:
- use the correct contractual specifications and coating manufacturer's specifications
- adhere to procedures or systems in place for risk assessment, COSHH, CHIPS data, personal protective equipment and other relevant safety regulations
- use safe and approved preparation methods and techniques at all times
- clean and secure all tools and equipment on completion of the preparation activities
- leave the work area in a safe and clean condition on completion of the activities
* *
Estimate the volume of paint to be prepared for the complete coating of bare substrate or for the overcoating of previously painted substrate, by spray or by brush, to include six of the following surfaces:
- outer bottom
- hull bottom
- boot-top
- topsides
- weather decks
- cabins/coach house
- tanks
- hatch covers
- pipes
- beams and profiles
- simple shapes
- other specific items
* *
Prepare four of the following two-pack (two component) products for application:
- water based epoxies
- solvent based epoxies
- epoxy shop primer
- non-skid deck paints
- two-component polyurethane paint
- solvent free epoxy
glass flake polyester
two-component coal tar epoxy paint
- zinc ethyl silicate paint
- wash primer
* *
Prepare four of the following single pack products:
- conventional alkyd or silicone alkyd
- single pack blast primer
- bituminous paint
- chlorinated rubber paint
- anti-fouling paint
- acrylic paint
- vinyl paints
- vinyl tar paint
- mastics
* *
Prepare marine coatings for application, by carrying out all of the following activities:
- obtaining the correct type and quantities of materials
- ensuring that the stored materials are within date
- ensuring that the correct mixing rations are adhered to
- checking that the prepared coating material is of the correct viscosity
- ensuring that the prepared material has been in the container for the induction period (if applicable)
- ensuring that the prepared material is at the temperature recommended for application
* *
Prepare yacht or boat coating materials in accordance with one of the following:
- BS or ISO standards and procedures
- customer (contractual) standards and requirements
- company standards and procedures
- paint/covering manufacturer's recommendations
- recognised compliance agency/body's standards (such as Lloyds, Boat Safety Scheme, BMEA Code)
- other accepted international standards
Reinstate the work area on completion of the preparation activities, to include carrying out all of the following:
- disposing of excess or unused paint, in accordance with approved procedures
- cleaning containers to be reused, and disposing of arisings and used solvents, in accordance with approved procedures
- disposing of non-reusable containers, in accordance with approved procedures
- cleaning and returning all tools and excess materials
- removing protection and exclusion arrangements (if no longer required)
- completing all required records (including consumption of paint and of solvents)
Scope Knowledge
Values
Behaviours
Behaviours:
You will be able to apply the appropriate behaviours required in the workplace to meet the job profile and overall company objectives, such as:
- strong work ethic
- positive attitude
- team player
- dependability
- responsibility
- honesty
- integrity
- motivation
- commitment