Maintaining marine refrigeration and air conditioning equipment
Overview
This standard identifies the competences you need to carry out planned maintenance on marine refrigeration and air conditioning equipment, in accordance with approved procedures, without the complete removal of units for overhaul. You will be required to maintain a range of marine refrigeration and air conditioning equipment, such as deep freeze plant, direct refrigeration plant (gas), indirect refrigeration plant (brine) and air conditioning plant and equipment. This will involve dismantling, removing and replacing faulty equipment, at unit or component level, on different types of marine refrigeration and air conditioning equipment major and minor assemblies, such as pipework, suction, discharge, filling and temperature control valves, compressors, distribution manifolds, pumps, condensers, evaporators, liquid receivers, heaters, vents and other associated equipment.
The maintenance activities will include making all necessary checks and adjustments to ensure that major and minor components are correctly replaced, positioned, aligned, locked and fastened and that the correct sealants are used. You will be expected to apply a range of dismantling and assembling methods and techniques, such as proof-marking to aid reassembly, dismantling components requiring pressure or expansion/contraction techniques, setting, aligning, adjusting and torque loading components and making `off-load' checks before starting up the maintained equipment.
Your responsibilities will require you to comply with organisational policy and procedures for the marine maintenance activities undertaken and to report any problems with these activities or with the tools and equipment used that you cannot personally resolve, or are outside your permitted authority, to the relevant people. You must ensure that all tools, equipment and materials used in the maintenance activities are removed from the work area on completion of the work and that all necessary job/task documentation is completed accurately and legibly. You will be expected to work with a minimum of supervision, taking personal responsibility for your own actions and for the quality and accuracy of the work that you carry out.
Your underpinning knowledge will provide a good understanding of your work and will provide an informed approach to applying maintenance procedures to marine refrigeration and air conditioning equipment. You will understand the dismantling and reassembly methods and procedures used and their application. You will know how the equipment functions, the purpose of the individual components and associated defects, in adequate depth to provide a sound basis for carrying out the maintenance activities, correcting faults and ensuring that the repaired equipment functions to the required specification. In addition, you will have sufficient in-depth knowledge of these components to ensure that they are fit for purpose and meet the specifications, thus providing a sound basis for carrying out reassembly.
You will understand the safety precautions required when carrying out the maintenance activities associated with marine refrigeration and air conditioning equipment, especially those for isolating the equipment. You will be required to demonstrate safe working practices throughout and will understand your responsibility for taking the necessary safeguards to protect yourself and others in the workplace, both ashore and afloat.
Performance criteria
You must be able to:
work safely at all times, complying with health and safety and other relevant regulations, directives and guidelines
follow the relevant maintenance schedules to carry out the required work
- carry out the maintenance activities within the limits of your personal authority
- carry out the maintenance activities in the specified sequence and in an agreed time scale
- report any instances where the maintenance activities cannot be fully met or where there are identified defects outside the planned schedule
- complete relevant documentation in line
with organisational procedures, and pass them on to the appropriate person - dispose of waste materials in accordance with safe working practices and approved procedures
Knowledge and Understanding
You need to know and understand:
- the health and safety requirements of the area in which the maintenance activity is to take place and the responsibility they place on you
the isolation and lock-off procedures or permit-to-work procedure that applies
the specific health and safety precautions to be applied during the maintenance procedure and their effects on others (including the precautions in the use of refrigerant gas and other chemicals)
- how to recognise and deal with emergencies and the procedures to be followed (such as methods of safely evacuating and closing down of compartments in the case of fire or other major incident, first aid, fire fighting and resuscitation of personnel)
- the environmental hazards associated with carrying out maintenance activities on marine refrigeration and air conditioning equipment (such as handling oils, greases, refrigeration gases, stored pressure/force, misuse of tools, using damaged or badly maintained tools and equipment, not following laid-down maintenance procedures)
the importance of wearing protective clothing and other appropriate safety equipment (PPE) during the maintenance
how to obtain and interpret drawings, specifications, manufacturers' manuals and other documents needed in the maintenance process
- how to carry out currency/issue checks of the specifications you are working with
- the procedure for obtaining replacement parts, materials and other consumables necessary for the maintenance
- company policy on the repair/replacement of components during the maintenance process
- the sequence to be adopted for the dismantling/reassembling of various types of assemblies
- the methods and techniques used to dismantle/reassemble marine refrigeration and air conditioning equipment (such as release of pressures/force, proof-marking, extraction, pressing, alignment, gas recovery)
- methods of checking that components are fit for purpose, how to identify defects and wear characteristics and the need to replace `lifed' items (such as seals and gaskets)
- how to make adjustments to components/assemblies to ensure that they function correctly (such as bedding in of white metal bearings, setting working clearance, setting travel)
- the basic principles of how the equipment functions, its operating sequence, the working purpose of individual units/components and how they interact
the identification, application, fitting and removal of different types of bearings (such as roller, ball, thrust, shell)
methods and techniques of fitting keys and splines
- identification, application, fitting and removal of different types of gears
- how to set up timing marks and position and set tension of belts correctly
- the identification and application of different types of locking devices
- the uses of measuring equipment (such as micrometers, verniers, expansion indicators and other measuring devices)
- the importance of making `off-load' checks before running the equipment under power
- how to check that tools and equipment are free from damage or defect, are in a safe and usable condition and are configured correctly for the intended purpose
- the generation of maintenance documentation and/or reports following the maintenance activity
- the equipment operating and control procedures to be applied during the maintenance activity
- how to use lifting and handling equipment in the maintenance activity
- the problems associated with the marine maintenance activity and how they can be overcome
- the organisational procedure to be adopted for the safe disposal of waste of all types of materials
- the extent of your own authority and whom you should report to if you have a problem that you cannot resolve
Scope/range
Scope Performance
Carry out all of the following during the maintenance of the marine refrigeration and air conditioning equipment:
- plan the maintenance activities to cause minimal disruption to normal working
- use the correct issue of company and/or manufacturers' drawings and maintenance documentation
- adhere to risk assessment, COSHH and other relevant safety standards
- ensure the safe isolation of equipment (such as mechanical, electricity, gas, air or fluids, steam)
- provide safe access and working arrangements for the maintenance area
- use lifting and handling equipment, in accordance with health and safety guidelines and procedures
- carry out the maintenance activities using appropriate techniques and procedures
- re-connect and return the system to service on completion of the maintenance activities
- dispose of waste items in safe and environmentally acceptable manner and leave the work area in a safe condition
Carry out maintenance activities on three of the following types of marine refrigeration and air conditioning equipment:
- deep freeze plant
- direct refrigeration plant (gas)
- air conditioning plant
- indirect refrigeration plant (brine)
Carry out maintenance activities on four of the following major components of marine refrigeration and air conditioning equipment:
- evaporator
- compressor
- temperature controllers
- condenser
- liquid receiver
- mechanical trips
- distribution manifold
- heater
- electrical control
- valves
- pump
Carry out twelve of the following activities, as applicable to the equipment being maintained:
- dismantling equipment to unit/sub-assembly level
- lapping in valves
- dismantling units to component level
- electrical bonding of components
- proof-marking/labelling of components
- making `off-load' checks before starting up
- checking components for serviceability
- replenishing oils and greases
- replacing all `lifed' items (such as seals, bearings, gaskets)
- replacing all damaged or defective components
- gas recovery
- setting and adjusting replaced components
- leak detection
- tightening fastenings to the required torque
- change dessicant
- applying gaskets and sealant/adhesives
- charge system
- re-assembling components to sub-assembly level
- re-assembling sub-assemblies to unit level
- securing components using mechanical fasteners and threaded devices
- applying bolt locking methods (such as split pins, wire locking, lock nuts, stiff nuts, swage nuts)
- functionally testing the completed system
Replace a range of minor components of marine refrigeration and air conditioning equipment, to include twelve of the following:
- shafts
- shell bearings
- drying agent
- couplings
- bearing housings
- static and dynamic seals
- seats
- keys
- housings
- pistons
- springs
- actuating mechanisms
- splines
- diaphragms
- structural components
- roller or ball bearings
- cams and followers
- resilient mounts
- pipes and unions
- shims and packing
- wire thread inserts
- instrumentation
- distribution manifold
- site glass
- sensing points
- strainer
- defrost mechanisms
- safety trips
- filter
- valves (suction, discharge, filling, temperature control)
- locking and retaining devices (such as circlips, pins)
- other specific components
Maintain marine refrigeration and air conditioning equipment, in compliance with one of the following standards:
- BS or ISO standards and procedures
- customer (contractual) standards and requirements
- company standards and procedures
- specific system requirements
- recognised compliance agency/body's standards
- other accepted international standards
Complete the relevant documentation in line
with organisational procedures, to include one of the following and pass it to the appropriate people:- job cards
- permit to work/formal risk assessment
- maintenance log or report
- chart of dimensional inspection
- other specific reporting method
Scope Knowledge
Values
Behaviours
Behaviours:
You will be able to apply the appropriate behaviours required in the workplace to meet the job profile and overall company objectives, such as:
- strong work ethic
- positive attitude
- team player
- dependability
- responsibility
- honesty
- integrity
- motivation
- commitment