Overhauling and repairing marine weapons equipment and systems
Overview
This standard identifies the competences you need to carry out overhauling activities on marine weapons equipment and systems, in accordance with approved procedures. The standard covers surface-to-surface, sub-surface, and surface-to-air systems, including assemblies and components associated with guns, missiles, torpedoes, depth charges and their launching, control and guidance systems, such as laser, radar, visual and sonar systems, weapon hoists and mountings with their safety and control firing units.
This will involve dismantling, removing and replacing faulty equipment, at component or unit level, on different types of weapon system/sub-assemblies. You will be expected to apply a range of dismantling/re-assembly methods and techniques, such as removing and replacing mechanical fasteners, removing and replacing damaged, faulty, worn or out-of-date components, arc limiting arrangements, soldering/de-soldering, crimping, harnessing and securing cables and components.
Your responsibilities will require you to comply with organisational policy and procedures for the overhaul of the marine weapon systems and to report any problems with the overhauling activities that you cannot personally resolve, or are outside your permitted authority, to the relevant people. You must ensure that all tools, equipment and materials used in the overhaul are removed from the work area on completion of the activities and that all necessary job/task documentation is completed accurately and legibly. You will be expected to work with a minimum of supervision, taking personal responsibility for your actions and for the quality and accuracy of the work that you carry out.
Your underpinning knowledge will provide a good understanding of your work and will provide an informed approach to applying overhauling procedures to marine weapon systems. You will understand the dismantling and re-assembly methods and procedures used and their application. You will understand the marine weapon system being worked on, component properties, functions and associated defects, in adequate depth to provide a sound basis for carrying out the overhauling activities, correcting faults and ensuring that the overhauled equipment functions to the required specification.
You will understand the safety precautions required when carrying out the overhauling activities, especially those for isolating the equipment. You will be required to demonstrate safe working practices throughout and will understand your responsibility for taking the necessary safeguards to protect yourself and others in the workplace.
Performance criteria
You must be able to:
- work safely at all times, complying with health and safety and other relevant regulations, directives and guidelines
- follow the relevant maintenance schedules to carry out the required work
- carry out the maintenance activities within the limits of your personal authority
- carry out the maintenance activities in the specified sequence and in an agreed time scale
- report any instances where the maintenance activities cannot be fully met or where there are identified defects outside the planned schedule
- complete relevant documentation in line with organisational procedures and pass them on to the appropriate person
- dispose of waste materials in accordance with safe working practices and approved procedures
Knowledge and Understanding
You need to know and understand:
- the specific safety practices and procedures that you need to observe when overhauling marine weapon systems and equipment (including any specific legislation, regulations/codes of practice for the activities, equipment or materials)
- the isolation and lock-off procedure or permit-to-work procedure that applies to the overhauling activities (to include electrical isolation, locking-off arrangements (both mechanical and electrical), removal of fuses, placing of maintenance warning notices, proving that isolation has been achieved and secured)
- the health and safety requirements of the work area where you are carrying out the overhauling activities and the responsibility these requirements place on you
- the hazards associated with overhauling marine weapon systems and equipment and with the associated tooling and metering devices used and how they can be minimised
- how to recognise and deal with emergencies and the procedures to be followed (such as methods of safely evacuating and closing down of compartments in the case of fire or other major incident, first aid, fire fighting and resuscitation of personnel)
the protective equipment that you need for both personal (PPE) and system protection
the precautions to be taken to prevent electrostatic discharge (ESD) damage to circuits and sensitive components (such as use of earthed wrist straps, anti-static mats, special packaging and handling areas)
what constitutes a hazardous voltage and how to recognise victims of electric shock
how to reduce the risks of a phase to earth shock (such as insulated tools, rubber matting and isolating transformers)
- the interpretation of drawings, standards, quality control procedures and specification used for the overhauling process
- how to carry out currency/issue status of the specification to which you are working
- the component/item which is being overhauled and its function within the system
- the various fixings, fasteners and termination devices, their method of deployment and the importance of these within the system
- the quality control procedures called for in the overhauling process
- the different types of cabling used in marine weapon systems (such as multicore cables, single core cables, steel wire armoured (SWA), mineral insulated (MI), screened cables)
the application and use of a range of electrical components (such as plugs, switches, sockets, indicators)
the different types of wiring enclosures that are used (to include conduit, trunking and traywork systems)
- the care, handling and application of ohmmeters, multimeters and other electrical measuring instruments
- company policy on the repair/replacement of components and the procedure for obtaining replacement parts, materials and other consumables necessary for the overhauling process
- the factors to take into account when deciding if a component/module can be repaired or not
- the different types and methods of repair that can be used
- how to check that the replacement components meet the required specification/operating conditions (such as values, tolerance, finish, current carrying capacity, voltage rating, power rating, ambient temperatures)
- the techniques used to remove, dismantle, dimensionally measure, inspect, reassemble, align, adjust and secure the components in the equipment/unit without damage
- methods of attaching identification marks/labels to removed components or cables, to assist with re-assembly
- methods of removing and replacing cables/wires in wiring enclosures without causing damage to existing cables or components
- methods of lifting, handling and supporting the components/equipment during the overhauling activities
- why unit electrical bonding, earth prevention and continuity are critical, and why earth bonding must be both mechanically and electrically secure
- the use of regulations when selecting wires and cables and when carrying out tests on electrical equipment and systems
- how to recognise equipment defects (such as degradation of finish, wear, misalignment, ineffective fasteners/terminations, damage or contamination and lack of fitness for purpose)
- how to make adjustments to components/assemblies to ensure that they function correctly
- the importance of making 'off-load' checks before proving the equipment with the electrical supply on
- the generation of documentation and/or reports following the overhauling activity
- the importance of ensuring that the overhauled equipment is completed to the prescribed category of cleanliness
- the tools, equipment and measuring devices used in the overhauling activities and their calibration/care and control procedures
- the problems that can occur with the overhauling operations and how these can be overcome
- the extent of your own responsibility and whom you should report to if you have problems that you cannot resolve
Scope/range
Scope Performance
1. Carry out all of the following during the overhaul of the marine weapon equipment:
- plan the overhauling activities to cause minimal disruption to normal working
- use the correct issue of vessel/craft system drawings and overhauling documentation
- adhere to risk assessment, COSHH and other relevant safety standards
- obtain clearance to work on the equipment and observe the appropriate power isolation and safety procedures
- provide safe access and working arrangements for the overhauling area
- carry out the overhauling activities, using approved techniques and procedures
- re-connect and return the system for setting to work on completion of the overhaul
- leave the work area in the prescribed category of cleanliness
2. Carry out overhauling activities on three of the following types of marine weapon system and equipment:
- gunnery systems
- torpedo
- depth charge
- surface decoys
- armament supply equipment
- weapon hoists
- weapons carriers
- sub-surface decoys
- surface-to-surface missiles
- surface-to-air missiles
- sub-surface missiles
- launcher equipment
- guidance equipment
3. Carry out overhauling activities on six of the following marine weapons systems components:
- radar units
- laser guidance
- firing units
- wire looms
- heat seeking units
- sonar equipment
- magazine stowage
- magazine hoists
- indicator units
- control units
- fusing units
4. Carry out all of the following overhauling activities, as applicable to the equipment being overhauled:
- isolating and locking off equipment
- dismantling equipment to unit level
- removing electrical units/components
- removing mechanical units and components
- disconnecting and re-connecting wires/cables
- removing and replacing damaged wires/cables
- visually checking components for serviceability
- dimensional inspection of components
- measurement of electrical values of components
- replacing damaged/defective units/components
- repairing damaged/defective units or modules
- adjustment of variables to return to tolerance
- replacing 'lifed' or updated items or components
- replacing damaged wiring enclosures
- attaching suitable cable identification markers
- harnessing and securing wires and cables
- securing, screening and locking
- earth bonding
- setting and adjusting replaced components
- making 'off-load' checks before powering up
- functionally testing the completed system
5. Replace a range of components, to include twelve of the following:
- cables
- connectors
- contactors
- relay components
- overload protection devices
- locking and retaining devices
- electronic modules
- electrical modules
- circuit boards
- indicator lamps
- batteries
- fuse units
- firing cams
- safety firing arc components
- other specific components
6. Make three of the following types of mechanical securing connections to the equipment:
- threaded fasteners
- locking devices
- screws
- quick release fasteners
- torque loaded bolts
7. Make four of the following types of electrical connection to the equipment:
- module blocks
- terminal blocks
- tray-mounted sockets
- free plugs
- crimping
- soldering
- fibre-optic connections
8. Carry out five of the following checks on the overhauled equipment/system:
- earth bonding checks
- insulation checks
- continuity checks
- resistance checks
- frequency checks
- phase balance checks
- functional checks of safety devices
- over voltage and under voltage checks
- speed/rotational arc limiting checks
- standing waveform reflection checks
- alignment checks
- clearance checks
- flow rate checks
- liquid level checks
- other specific check
9. Ensure that the overhauled weapon equipment meets all of the following:
- all components and sub-assemblies are fit for purpose
- all connections are safe and sound
- equipment static checks, after overhaul, meet specifications
- all potential defects are identified, recorded and reported for future action
10. Overhaul marine weapon systems and equipment, in compliance with one of the following standards:
- BS or ISO standards and procedures
- customer (contractual) standards and requirements
- company standards and procedures
- specific equipment requirements/manufacturer's data
- recognised compliance agency/body's standards
- other accepted international standards
11. Complete the relevant documentation in line with organisational procedures, to include one from the following and pass it to the appropriate people:
- job cards
- system log
- maintenance/overhaul logs or reports
- work authorisation documents
- vessel wiring documentation
- other specific reporting method
Scope Knowledge
Values
Behaviours
Behaviours:
You will be able to apply the appropriate behaviours required in the workplace to meet the job profile and overall company objectives, such as:
- strong work ethic
- positive attitude
- team player
- dependability
- responsibility
- honesty
- integrity
- motivation
- commitment