This standard identifies the competencies you need to prepare and operate manual TIG or Plasma-arc welding equipment, in accordance with instructions and/or approved welding procedures. You will be required to check that all the workholding equipment and manipulating devices required are available and in a usable condition. You will be expected to check the welding equipment to ensure that all the leads/cables, hoses and torch are securely connected and free from damage. In preparing to weld, you will need to set and adjust the welding conditions, in line with the instructions or welding procedure specification. You must operate the equipment safely and correctly and make any necessary adjustments to settings, in line with your permitted authority, in order to produce the welded joints to the required specification.

Your responsibilities will require you to comply with organisational policy and procedures for the welding activities undertaken, and to report any problems with the welding equipment, or welding activities that you cannot resolve, or are outside your permitted authority, to the relevant people. You will be expected to work to instructions, with a minimum of supervision, taking personal responsibility for your own actions and for the quality and accuracy of the work that you carry out.

Your underpinning knowledge will be sufficient to provide a sound basis for your work, and will provide an understanding of how the TIG or Plasma-arc welding process works. You will know about the equipment, materials and consumables, in adequate depth to provide a sound background for the welding operations to be performed, and for ensuring the work output is produced to the required specification.

You will understand the safety precautions required when working with the welding equipment. You will be required to demonstrate safe working practices throughout, and will understand the responsibility you owe to yourself and others in the workplace.

---

1. work safely at all times, complying with health and safety and other relevant regulations, directives and guidelines
2. follow the relevant joining procedure and job instructions
3. check that the joint preparation complies with the specification
4. check that joining and related equipment and consumables are as specified and fit for purpose
5. make the joints as specified using the appropriate thermal joining technique
6. produce joints of the required quality and of specified dimensional accuracy
7. shut down the equipment to a safe condition on completion of joining activities
8. deal promptly with excess and waste materials and temporary attachments, in line with approved and agreed procedures
9. deal promptly and effectively with problems within your control and report those that cannot be solved

---

1. the safe working practices and procedures to be observed when working with TIG or Plasma-arc welding equipment (general workshop and site safety; appropriate personal protective equipment (PPE); fire prevention; protecting other workers from the effects of the electric arc; safety in enclosed/confined spaces; fume control; accident procedure; statutory requirements, risk assessment procedures and relevant requirements of HASAWA, COSHH and Work Equipment Regulations; safe disposal of waste materials)
2. the hazards associated with arc welding (live electrical components; poor earthing arrangements; the electric arc; fumes and gases; gas supply leaks; spatter; hot slag and metal; grinding and mechanical metal/slag removal; elevated working; enclosed spaces; slips, trips and falls), and how they can be minimised
3. the correct handling and storage of gas cylinders (manual handling and use of cylinder trolley, leak detection procedures, relevant BCGA codes of practice, cylinder identification, gas pressures, cylinder and equipment safety features, emergency shutdown procedures)
4. the manual TIG or Plasma-arc welding process (basic principles of fusion welding; power sources; ancillary equipment; power ranges; arc initiation system; care and maintenance of equipment)
5. the consumables associated with TIG or Plasma-arc welding (types of filler wire, types of shielding gas, welding electrodes, gas supply and control, control and storage of consumables)
6. the types of welded joints to be produced (fillet and butt welds, single and multi-run welds, joints in pipe plate, sheet and sections; welding positions)
7. setting up and restraining the joint (confirming correct set-up of joint; cleanliness of materials used; the use of jigs and fixtures, manipulators and positioners, restraining devices; tack welding size and spacing in relationship to material thickness)
8. preparing the equipment, and checks that need to be made to ensure that it is safe to use (condition of electrical connections, power return and earthing arrangements, operating parameters)
9. the techniques of operating the welding equipment to produce a range of joints in the various joint positions (fine tuning parameters, correct manipulation of torch, safe closing down of the welding equipment)
10. the importance of complying with job instructions and the welding procedure specification
11. how to use and extract information from engineering drawings and related specifications (to include symbols and conventions to appropriate British, European or relevant International standards in relation to work undertaken)
12. problems that can occur with the welding activities and how these can be overcome (causes of distortion and methods of control, effects of welding on materials and sources of weld defects; methods of prevention)
13. the organisational quality systems used and weld standards to be achieved; weld inspection and test procedures used (including visual, mechanical and non-destructive tests)
14. personal approval tests and their applicability to your work
15. the extent of your own authority and whom you should report to if you have problems that you cannot resolve
16. reporting lines and procedures, line supervision and technical experts

---

---

​

1. Prepare for the manual TIG or plasma arc welding process, to include carrying out all of the following:

   1. obtaining the appropriate equipment for the welding activities to be carried out (type, current capacity)
   2. checking the condition of, and correctly connecting welding leads/cables, hoses, shielding gas supply and wire feed mechanisms
   3. setting and adjusting welding conditions/parameters, in accordance with welding procedure specification
   4. preparing the work area for the welding activities (such as siting welding screens, positioning fume extraction equipment)
   5. ensuring that the workpiece is correctly set up with regard to specified joint preparation and that it is secure
   6. obtaining and wearing appropriate personal protective equipment

2. Set up, check, adjust and use manual welding and related equipment for one of the following welding processes:

   1. TIG
   2. plasma-arc

3. Use consumables appropriate to the material and application, to include both of the following:

   1. one size of electrode
   2. two types of filler wire from different material groups

4. Produce welded joints which incorporate the following:

   1. butt welds and
   2. fillet welds OR welds made autogenously (without filler wire)

5. Produce joints in one form of specified materials from the following:

   1. plate             
   2. pipe/tube
   3. section            
   4. sheet (<3mm)
   5. other specific forms

6. Weld joints according to approved welding procedures, in good access situations, in two of the following BS EN ISO 6947 **positions:

   1. flat (PA):
   2. horizontal (PC)
   3. vertical upwards (PF)
   4. horizontal vertical (PB)
   5. vertical downwards (PG)

7. Produce welded components which:

   1. achieve a minimum weld quality equivalent to the level given in the relevant standard (such as BS **EN ISO 5187 or BS EN ISO 10042) required by the application standard or specification
   2. meet and verify the required dimensional accuracy within specified tolerance

---

---

---

​Additional Information

You will be able to apply the appropriate behaviours required in the workplace to meet the job profile and overall company objectives, such as:

• strong work ethic
• positive attitude
• team player
• dependability
• responsibility
• honesty
• integrity
• motivation
• commitment

---

---

---

---

---

3

---

31 Mar 2020

---

Current

---

Original

---

Semta

---

SEMFWE206

---

Engineering, Engineering and Manufacturing Technologies, Metal Forming, Welding and Related Trades

---

5213

---

engineering; welding; fabrication; manual welding; TIG; plasma arc; fusion; techniques; equipment

---