Testing installed engines for motorsport vehicles (rolling road)
Overview
This standard identifies the competences you need to test installed engines in motorsport vehicles on a rolling road testing rig, as appropriate to the engine type, in accordance with approved procedures. You will be required to carry out all necessary preparations to the engine in readiness for the tests to be carried out, and these will include ensuring that the motorsport vehicle is correctly located on the rolling road, that all ancillary equipment is fitted to the engine, that appropriate test instrumentation is correctly connected and that all necessary electrical checks are carried out. In carrying out the tests, you will be required to follow laid-down procedures, to ensure that the working area is clear, that appropriate guards and notices are displayed, that engine runs/tests are carried out in accordance with the appropriate schedule, monitoring procedures are complied with, analysis of results is made, and that test documentation is completed accurately and legibly.
Your responsibilities will require you to comply with organisational policy and procedures for the tests undertaken, and to report any problems with the testing activities that you cannot personally resolve, or that are outside your permitted authority, to the relevant people. You will be expected to work with a minimum of supervision, taking personal responsibility for your own actions and for the quality and accuracy of the work that you carry out.
Your underpinning knowledge will provide a good understanding of your work, and will provide an informed approach to undertaking the appropriate engine test procedures for motorsport vehicles. You will understand the vehicle and engine being tested, the specific test schedule to be followed, and will know what the various instruments and readings mean, in adequate depth to provide a sound basis for carrying out the tests to the required specification.
You will understand the safety precautions required when carrying out the testing activities, in particular those involved with fuelling and running the vehicle. You will be required to demonstrate safe working practices throughout, and will understand the responsibility you owe to yourself and others in the workplace.
Performance criteria
You must be able to:
- work safely at all times, complying with health and safety and other relevant regulations, directives and guidelines
- carry out the required tests using appropriate tools and equipment
- set up and carry out the tests using the correct procedures and within agreed timescales
- record the results of the tests in the appropriate format
- review and analyse the results and carry out further tests if necessary
- deal promptly and effectively with problems within your control and report those that cannot be solved
- ensure that work records are completed, stored securely and available to others, as per organisational requirements
- leave the work area in a safe condition on completion of the activities, as per organisational and legal requirements
Knowledge and Understanding
You need to know and understand:
- the specific safety precautions to be taken whilst carrying out the activities (including any specific legislation, regulations or codes of practice relating to the activities, equipment or materials)
- the health and safety requirements of the work area and the activities, and the responsibility these requirements place on you
- the hazards associated with the activities, and how to minimise them and reduce risks
the personal protective equipment and clothing (PPE) to be worn during the activities
the preparations to be carried out on the vehicle/engine prior to starting the tests (location on the rolling road, fitting test instrumentation, fitting ancillary equipment, attaching electrical power and making final electrical checks of all systems)
- how to carry out initial start-up procedures and checks (to include checking that engine starting and shutdown systems operate correctly, idle speed is satisfactory, fuel flow is operating correct, oil pressure is to specification, oil filters, connections, gaskets and seals are free from leaks)
- how to obtain the required test schedules and specifications for the motorsport vehicle and engine type being tested, and how to check their currency and validity
- how to read and interpret the specifications, and from whom you can seek assistance if you have problems or issues regarding the test schedules or specifications
- the methods and procedures to be used to carry out the various motorsport vehicle/engine tests
- the need to apply engine power in incremental stages, and to check all readings, temperatures and pressures at each stage
- how to record the results of each individual test, and the documentation that must be used
- from whom to seek authorisation if you need to alter or change the test procedures
- how to analyse the test results and make valid decisions about the acceptability of the vehicle (including referencing to standard temperature and pressure values)
- how to analyse the test results and make valid decisions about the acceptability of the engine
- the procedures to be followed if the engine or system fails to meet the test specification
- potential problems that can occur with the testing activities, and how they can be overcome
- problems that may cause errors or discrepancies in/with the test results, and how to avoid them
- any environmental controls required relating to the testing (exhaust extraction, climate simulation)
- why equipment control is critical, and what to do if a piece of equipment is unaccounted for on completion of the testing activities
- the extent of your own responsibility and to whom you should report if you have problems that you cannot resolve
- how to access, use and maintain information to comply with organisational requirements and legislation
Scope/range
Scope Performance
Carry out all of the following during the testing activities:
- obtain and use the appropriate documentation (such as job instructions, test schedules, test procedures, engine specifications, quality control documentation and other related documentation)
- adhere to procedures or systems in place for risk assessment, hazardous substances, personal protective equipment and other relevant safety regulations and procedures to realise a safe system of work
- provide and maintain safe access and working arrangements for the test area, and ensure that any appropriate environmental conditions can be met
- use safe and approved testing techniques and procedures at all times
- return all tools and equipment to the correct location on completion of the activities
- dispose of waste items in a safe and environmentally acceptable manner
- leave the vehicle and work area in a safe and appropriate condition on completion of the engine tests
Test engines for one of the following types of motorsport vehicle:
- single seater
- kart
- rallying
- historic
- sports car
- other specific approved competition vehicle
Carry out tests to appropriate schedules on one of the following types of motorsport engine:
- production engines
- repaired/overhauled engines
- development engines
Prepare the engine for testing and carry out initial start-up checks, to include all of the following, as applicable to the engine type:
- locate the vehicle on the rolling road, and secure it where appropriate
- fit all required ancillary equipment (such as forced air fans, exhaust extraction)
- check engine fluid levels and sufficient fuel for the test
- make all required connections to the engine (to include fuel monitoring, electrical and instrumentation)
- carry out all necessary electrical checks and confirm that the vehicle is ready for testing
- ensure that all personal are clear of the test facility and that safe working distance procedures are maintained
- check the engine starting system
- run the engine and check that the engine shutdown system operates correctly
- carry out idle checks
- check that the engine oil pressure is satisfactory
- check that fuel flow is operating correctly
- check all oil filters, connections, gaskets and seals for signs of leakage
Undertake engine tests as listed in the appropriate engine test schedule, to include all of the following:
- initiating the engine test sequence
- carrying out running and handling checks
- carrying out performance curves
- checking that engine pressures are within specification
- checking that engine temperature is within specification
- checking that the throttle or fuel injection operates within specifications
- ensuring that maximum power is achieved
- checking the engine for hot and cold running temperatures
- checking and monitoring exhaust emissions
Deal with two of the following complexities during the engine tests:
- engine runs with no faults
- engine runs with faults
- engines with intermittent faults
Check the vehicle on completion of the testing procedures, to include carrying out all of the following:
- shutting down the rolling road (where appropriate)
- checking oil filters, connections, gaskets and seals for signs of oil leakage
- checking all hoses and connections for fluid leakage
- checking all fuel connections for leakage
- removing and checking magnetic chip detectors for contamination (where appropriate)
- removing and checking slave filters for contamination
- draining all oil and fuel from the engine
- removing all instrumentation fitted for the tests
- removing the vehicle from the rolling road, safely and correctly
- preparing the vehicle for passing to race team/customer
Review and analyse the results of the test run, using two of the following:
- data sheets
- calibration records
- motorsport vehicle history sheet
- vehicle test schedule
- fault records
Check tests comply with one of the following:
- race associations legislation, current industry standards, codes of practice and procedures
- engine manufacturer's specification
- customer standards and requirements
- team/company standards and procedures
- specific vehicle requirements