Maintaining rotor blade and tail pylon folding systems on rotorcraft
Overview
This standard identifies the competences you need to carry out maintenance activities on rotor blade and tail pylon folding systems, in accordance with the approved rotorcraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements. It covers the whole of the system for ensuring automatic or manual folding and spreading of the rotor blades and/or tail pylon, and includes the mechanical, hydraulic, electrical and indicating equipment and systems permanently fitted to the rotorcraft. The maintenance activities will include the removal, fitting and testing of a range of rotor blade and tail pylon folding system components. You will remove the required components and fit approved replacements, as appropriate. You will then need to test and adjust the completed system to meet the rotorcraft maintenance manual, change documentation (service bulletin) and airworthiness requirements.
Your responsibilities will require you to comply with the specific practices and procedures identified in the rotorcraft manual, change/service bulletin documentation and airworthiness requirements for the maintenance activities undertaken, and to report any problems with these requirements that you cannot personally resolve, or that are outside your permitted authority, to the relevant people. You must ensure that all tools, equipment and materials used are correctly accounted for on completion of the activities, and that all necessary job/task documentation is completed thoroughly, accurately and legibly. You will be expected to work with a minimum of supervision, taking personal responsibility for your own actions and for the quality and accuracy of the work that you carry out.
Your underpinning knowledge will provide a good understanding of your work, and will provide an informed approach to applying the appropriate maintenance techniques and procedures to rotor blade and tail pylon folding systems. You will understand the component removal, fitting and testing methods and procedures, and their application, along with the rotor blade and tail pylon folding systems maintenance requirements. You will know how the equipment functions, the common problems that can occur, the purpose of the individual components and associated defects, in adequate depth to provide a sound basis for carrying out the maintenance activities, correcting faults and for ensuring that the rotor blade and tail pylon folding systems are maintained to the required standard.
You will understand the safety precautions required when working on the rotor blade and tail pylon folding systems, especially those for ensuring that the power system is safely and correctly isolated. You will be required to demonstrate safe working practices throughout, and will understand your responsibility for taking the necessary safeguards to protect yourself and others in the workplace.
Notes:
- This standard is designed to cover the practical experience requirements of the Airline Transport Association (ATA) Chapter 66 Rotor Blade and Tail Pylon Folding Systems.
- To display competence in this standard, it is necessary to both remove and fit rotor blade and tail pylon folding system components. You must remove components; however, you may fit a replacement component where the original was previously removed by another person. You should also be aware of how to leave a system in a safe condition if maintenance tasks cannot be completed. This covers both the physical systems and the job documentation.
Performance criteria
You must be able to:
- work safely at all times, complying with health and safety and other relevant regulations, directives and guidelines
- follow the relevant maintenance schedules to carry out the required work
- carry out the maintenance activities within the limits of your personal authority
- carry out the maintenance activities, and replace components in the specified sequence and in an agreed timescale
- report any instances where the maintenance activities cannot be fully met or where there are identified defects outside the planned schedule
- complete relevant documentation in accordance with organisational requirements
- dispose of waste materials in accordance with safe working practices and approved procedures
- leave the aircraft and system in a safe and appropriate condition, free from foreign object debris on completion of the activities
Knowledge and Understanding
You need to know and understand:
- the specific safety practices and procedures that you need to observe when working on rotorcraft rotor blade and tail pylon folding systems (including any specific legislation, regulations/codes of practice for the activities, equipment or materials)
- the importance of maintenance on rotorcraft rotor blade and tail pylon folding systems, and impact upon legislation and local procedures
- the need to check that cabin/cockpit switches, selectors and circuit breakers are in the correct position before applying any form of external power (such as electrical, hydraulic)
- the requirements and importance of understanding and applying human factors as defined by the regulatory requirements and the potential impact if these are not adhered to
- the hazards associated with carrying out maintenance activities on rotorcraft rotor blade and tail pylon folding systems, and with the tools and equipment used (such as handling oils, greases, traps from moving parts, lifting and moving heavy and bulky components, hot parts of engines, misuse of tools), and how to minimise them and reduce any risk
the protective equipment that you need to use for both personal protection (PPE) and protection of the rotorcraft
what constitutes a hazardous voltage and how to recognise victims of electric shock
how to reduce the risks of a phase to earth shock (such as insulated tools, rubber matting and isolating transformers)
the importance of aircraft husbandry and of ensuring that, throughout the maintenance activity, the aircraft and work area are maintained free from foreign objects, and the implications of FOD to the safety of the aircraft
- how to extract and use information from rotorcraft manuals, log books, flight logs, charts, system and physical layouts, specifications, symbols used in rotorcraft rotor blade and tail pylon folding systems, and other documents needed in the maintenance activities
- how to carry out currency/issue checks on the specifications you are working with
- terminology used in rotorcraft rotor blade and tail pylon folding systems, and the use of system diagrams and associated symbols
- the principles of operation of the rotor blade and tail pylon folding system being worked on, and the function of the units that make up the system (such as mechanisms, hydraulic actuators, electrical equipment and indicating systems)
- the techniques used to remove components from rotor blade and tail pylon folding systems without damage to the components or surrounding structure (such as release of pressures/force, draining of fluids, removal of components and the need to protect the system integrity by ensuring that exposed components and pipe ends are correctly covered/protected)
- the various mechanical fasteners to be removed and replaced, and their methods of removal and replacement (such as threaded fasteners, special securing devices)
- the various types of electrical connector that are used, methods of unlocking, orientation indicators and locating and locking-in of the connections
- why electrical bonding is critical, and why it must be both mechanically and electrically secure
- methods of lifting, handling and supporting the components/equipment during the maintenance activities
- the need to label and store correctly components that require repair or overhaul, and to check that replacement components have the correct part/identification markings and accompanying release documentation
- how to replace and reconnect components into the rotor blade and tail pylon folding system (such as the use of gaskets/seals; ensuring the correct orientation, position and alignment; tightening securing devices to the required torque; replacing locking and securing devices; eliminating stress on pipework/connections; ensuring that pipework and cables are correctly supported at suitable intervals; carrying out visual checks of all components)
- how to make adjustments to components to ensure that they function correctly (such as travel, freedom of movement and working clearance)
- why securing devices need to be correctly torque loaded, locked and labelled, and the different methods that are used
- the tools and equipment used in the maintenance activities, and their calibration/care and control procedures
- why tool/equipment control is critical and what to do if a tool or piece of equipment is unaccounted for on completion of the activities
- how to carry out routine checks and servicing of the rotorcraft rotor blade and tail pylon folding system
- the tests to be carried out on the rotor blade and tail pylon folding system, and the test equipment to be used
- the methods and procedures to be used to carry out the various tests on the rotor blade/tail pylon folding systems
- the importance of carrying out the tests in the specified sequence, checking readings/movements at each stage
- how to record the results of each individual test and the documentation that must be used
- how to analyse the test results, and how to make valid decisions about the acceptability of the rotor blade and tail pylon folding system
- the procedures to be followed if the equipment or system fails to meet the test specification
- the recording documentation to be completed for the activities undertaken and, where appropriate, the importance of marking and identifying specific pieces of work in relation to the documentation
- the procedure for the safe disposal of waste materials, scrap components and fuel/fluids
- the extent of your own authority and to whom you should report if you have problems that you cannot resolve
Scope/range
Scope Performance
Carry out all of the following during the maintenance of the rotor blade and tail pylon folding system:
- ensure that appropriate authorisation to work on the rotorcraft is obtained, and observe all relevant isolation and safety procedures
- obtain and use the correct documentation (such as job instructions, technical instructions, rotorcraft manuals and maintenance documentation)
- obtain the correct tools and equipment for the activity, and check that they are in a safe, tested and usable condition and within current calibration dates
- adhere to procedures or systems in place for risk assessment, COSHH, personal protective equipment and other relevant safety regulations and procedures to realise a safe system of work
- ensure that the relevant safety devices and mechanical/physical locks are in place (where appropriate)
- use approved removal, fitting and testing techniques and procedures at all times
- return tools and equipment to the correct storage location on completion of the activities
- ensure that work carried out is correctly documented and recorded
- ensure that any outstanding tests are correctly documented
Carry out maintenance on two of the following parts of the rotorcraft rotor blade and tail pylon folding system:
- rotor blades
- tail pylon
- controls and indicating
Remove and fit six different rotor blade and tail pylon folding system components from the following:
- actuators
- mechanical controls (plungers, springs, rollers)
- sensors
- control valves
- electrical controls (solenoids, motors, switches)
- hinge mechanisms
- pipes and hoses
- flexible couplings
- fairings
- indicators and warning devices
- levers/linkages
- bearings
- cable/harness/wiring
- bolt assemblies
- static seals/gaskets
- switches/plugs
- support brackets
- dynamic seals
- locks and stops
- control units
- other specific components
Carry out fifteen of the following maintenance activities:
- removing fairings and covers to expose components to be removed
- carrying out fault diagnosis and system checks
- preparing the system for maintenance (such as isolating, releasing pressure, draining fluids)
- disconnecting electrical connections
- disconnecting/reconnecting bonding leads
- refitting components in the correct position, orientation and alignment
- disconnecting/removing hoses and pipes
- removing securing devices and mechanical fasteners
- setting and adjusting replaced components (such as travel, working clearance)
- supporting equipment to be removed
- making mechanical connections
- dismantling equipment to an appropriate level
- making electrical connections
- covering (protecting) exposed components, wires, pipework or vents
- torque loading as required
- replenishing fluid systems
- checking components for serviceability
- carrying out system functional checks
- replacing all damaged/defective components
- replacing single use items such as seals, filters, gaskets
- ensuring that replacement components have the correct part numbers
- fitting blanks, labelling (and storing in the correct location) components that require repair or overhaul
- applying bolt locking methods (such as split pins, wire locking, lock nuts)
- carrying out area inspections prior to task close down
Service/check and test rotor blade and tail pylon folding systems, to include carrying out three of the following:
- visually checking folding system for damage and leaks
- checking tracking/balance
- checking critical fastenings for security
- carrying out a safety interlock test
- checking for freedom and range of movement
- checking indicating and warning systems
- checking and adjusting folding mechanisms
- built in test equipment (BITE) test
- checking and adjusting locking mechanisms
- 'special-to-type' test
- checking for vibration
Complete the relevant paperwork, to include one from the following and pass it to the appropriate people:
- job cards/work sheets
- rotorcraft cabin log
- computer records
- rotorcraft log book
- rotorcraft technical log
Carry out maintenance on rotorcraft rotor blade and tail pylon folding systems in compliance with one of the
- Civil Aviation Authority (CAA)/European Aviation Safety Agency (EASA)
- Ministry of Defence (MoD)
- Military Aviation Authority (MAA)
- Aerospace Quality Management Standards (AS)
- Federal Aviation Authority (FAA)
- aircraft maintenance manual/approved change documentation (service bulletin)
- manufacturers standards and procedures
Scope Knowledge
Values
Behaviours
You will be able to apply the appropriate behaviours required in the workplace to meet the job profile and overall company objectives, such as:
- strong work ethic
- positive attitude
- team player
- dependability
- responsibility
- honesty
- integrity
- motivation
- commitment