Maintaining cabin systems on aircraft
Overview
This standard identifies the competences you need to carry out maintenance activities on aircraft cabin systems, in accordance with the aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements. It includes units and components which provide a means of entertaining the passengers and providing communication within the aircraft. It also includes the means by which passengers and cabin crew can access communications equipment to exchange data and messages with other air or ground stations. It does not include the transmitting/receiving system itself such as SATCOM, HF, VHF and UHF which are covered in other standards/ATA chapters.
The maintenance activities will include the removal, fitting and testing of a range of cabin system components. You will be required to select the correct tools and equipment to use, based on the operations to be performed and the components to be removed or replaced. The cabin system will include units and components associated with in-flight entertainment systems, active noise control, passenger address, interphone, audio and video security monitoring, as applicable to the aircraft type. You will remove the required components and fit approved replacements, as appropriate. You will then need to test the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements.
Your responsibilities will require you to comply with the specific practices and procedures identified in the aircraft manual, change/service bulletin documentation and airworthiness requirements for the maintenance activities undertaken, and to report any problems with these activities that you cannot personally resolve, or that are outside your permitted authority, to the relevant people. You must ensure that all tools, equipment and materials used are correctly accounted for on completion of the activities, and that all necessary job/task documentation is completed thoroughly, accurately and legibly. You will be expected to work with a minimum of supervision, taking personal responsibility for your own actions and for the quality and accuracy of the work that you carry out.
Your underpinning knowledge will provide a good understanding of your work, and will provide an informed approach to applying the appropriate maintenance techniques and procedures to aircraft cabin systems. You will understand the removal, fitting and testing methods and procedures, and their application, along with the system maintenance requirements. You will know how the equipment functions, the common problems that can occur, the purpose of the individual components and associated defects, in adequate depth to provide a sound basis for carrying out the maintenance activities, correcting faults and for ensuring that the equipment is maintained to the required standard.
You will understand the safety precautions required when working on the aircraft cabin systems and when using the associated tools and equipment. You will be required to demonstrate safe working practices throughout, and will understand your responsibility for taking the necessary safeguards to protect yourself and others in the workplace.
Notes:
- This standard is designed to cover the practical experience requirements of the Airline Transport Association (ATA) Chapter 44 Cabin Systems.
- To display competence in this standard, it is necessary to both remove and fit aircraft cabin system components. You must remove components; however, you may fit a replacement component where the original was previously removed by another person. You should also be aware of how to leave a system in a safe condition if maintenance tasks cannot be completed. This covers both the physical systems and the job documentation.
Performance criteria
You must be able to:
- work safely at all times, complying with health and safety and other relevant regulations, directives and guidelines
- follow the relevant maintenance schedules to carry out the required work
- carry out the maintenance activities within the limits of your personal authority
- carry out the maintenance activities, and replace components in the specified sequence and in an agreed timescale
- report any instances where the maintenance activities cannot be fully met or where there are identified defects outside the planned schedule
- complete relevant documentation in accordance with organisational requirements
- dispose of waste materials in accordance with safe working practices and approved procedures
- leave the aircraft and system in a safe and appropriate condition, free from foreign object debris on completion of the activities
Knowledge and Understanding
You need to know and understand:
- the specific safety practices and procedures that you need to observe when working with aircraft cabin systems (including any specific legislation, regulations/codes of practice for the activities, equipment or materials)
- the importance of maintenance on aircraft cabin systems, and impact upon (Extended Range Twin-Engine Operations Procedures) ETOPS systems, Electrical Wiring Interconnect Systems (EWIS), legislation and local procedures
- the hazards associated with removing, fitting and testing aircraft cabin system components, and with the tools and equipment used, and how to minimise them and reduce any risk
- the requirements and importance of understanding and applying human factors as defined by the regulatory requirements and the potential impact if these are not adhered to
the protective equipment that you need to use for both personal protection (PPE) and protection of the aircraft
what constitutes a hazardous voltage and how to recognise victims of electric shock
how to reduce the risks of a phase to earth shock (such as insulated tools, rubber matting and isolating transformers)
the importance of aircraft husbandry and of ensuring that, throughout the maintenance activity, the aircraft and work area are maintained free from foreign objects, and the implications of FOD to the safety of the aircraft
- how to extract and use information from aircraft manuals, log books, flight logs, charts, circuit and physical layouts, specifications, symbols used in aircraft cabin systems, and other documents needed in the maintenance process
- how to carry out currency/issue checks on the specifications you are working with
- terminology used in aircraft cabin systems, and the use of system diagrams and associated symbols
- the principles of operation of the cabin system being worked on, and the function of the various units that make up the system
- the various mechanical fasteners that are used, and their methods of removal and replacement (such as threaded fasteners, special securing devices)
- the importance of using the specified fasteners for the installation, and why you must not substitute others
- why securing devices need to be locked and labelled, and the different methods that are used to remove and install them
- the torque loading requirements on the fasteners and what to do if these loadings are exceeded or not achieved
- the various types of electrical connector that are used, methods of unlocking, orientation indicators and locating and locking-in of the connections
- the techniques used to remove components from aircraft cabin systems without damage to the components or surrounding structure (such as the need to protect the circuit integrity by covering and labelling exposed circuits)
- the importance of applying electrostatic discharge (ESD) avoidance procedures when working on sensitive equipment or devices
- the need to label and store correctly components that require repair or overhaul, and to check that replaced components have the correct part/identification markings and accompanying release documentation
- the techniques used to position, align, adjust and secure the replaced components to the aircraft without damage to the components or surrounding structure
- methods of lifting, handling and supporting the components/equipment during the maintenance activities
- why electrical bonding is critical, and why it must be both mechanically and electrically secure
- the tools and equipment used in the maintenance activities, and their calibration/care and control procedures
- why tool/equipment control is critical and what to do if a tool or piece of equipment is unaccounted for on completion of the activities
- how to recognise defects (such as incorrectly seated plugs and sockets, ineffective fasteners, foreign object damage or contamination)
- how to carry out routine checks and servicing of the aircraft cabin system equipment (including checking function of radios and passenger address system)
- the need to check that cabin/cockpit switches, selectors and circuit breakers are in the correct position before applying any form of external power (such as electrical, hydraulic, air or vacuum)
- the types of test to be carried out on the aircraft cabin systems and the test equipment to be used
- the methods and procedures to be used to carry out the various tests on the cabin systems
- how to record the results of each individual test and the documentation that must be used
- how to analyse the test results and how to make valid decisions about the acceptability of the cabin systems
- the procedures to be followed if the equipment or system fails to meet the test specification
- the recording documentation to be completed for the activities undertaken and, where appropriate, the importance of marking and identifying specific pieces of work in relation to the documentation
- the procedure for the safe disposal of waste materials and scrap components
- the extent of your own authority and to whom you should report if you have problems that you cannot resolve
Scope/range
Scope Performance
Carry out all of the following during the maintenance of the aircraft cabin system equipment:
- ensure that appropriate authorisation to work on the aircraft is obtained, and observe all relevant isolation and safety procedures
- obtain and use the correct documentation (such as job instructions, technical instructions, aircraft manuals and maintenance documentation)
- obtain the correct tools and equipment for the activity, and check that they are in a safe, tested and usable condition and within current calibration date
- adhere to procedures or systems in place for risk assessment, COSHH, personal protective equipment and other relevant safety regulations and procedures to realise a safe system of work
- ensure that the relevant safety devices and mechanical/physical locks are in place (where appropriate)
- where appropriate, apply electrostatic discharge (ESD) avoidance procedures
- use approved removal, fitting and testing techniques and procedures at all times
- return tools and equipment to the correct storage location on completion of the activities
- ensure that work carried out is correctly documented and recorded
- ensure that any outstanding tests are correctly documented
Carry out maintenance on three of the following parts of the aircraft cabin systems:
- cabin core system (such as active noise control)
- in-flight entertainment (such as audio, video, information, games)
- external communication (such as access to telecommunications, digital fax, Wi-Fi, mobile phones)
- passenger address and interphone (such as internal communications)
- cabin mass memory system (such as configuration data, multimedia programs)
- cabin monitoring (such as surveillance cameras, passenger conversation/movement)
Remove and fit four different cabin system components (at least two must be from group A):
Group A
1. control units
2. video equipment
3. keyboards
4. cameras
5. cabin control panels
6. telephones
7. media drives
8. monitors
9. radio units
10. modems
11. printers
12. display panels
13. audio equipment
Group B
14. batteries
15. headsets
16. instruments/gauges/indicators
17. switches
18. handsets
19. wires/cables
20. relays
21. electronic signs
22. plugs/sockets
23. circuit breakers
24. loudspeakers
25. transformers
26. other specific components
Carry out fifteen of the following maintenance activities:
- removing access panels and covers to expose components to be removed
- carrying out fault diagnosis and system checks
- preparing the system for maintenance (such as isolating)
- disconnecting electrical connections
- replacing damaged/defective components
- removal of bonding
- refitting components in the correct position, orientation and alignment
- removing cable securing devices
- removing securing devices and mechanical fasteners
- making mechanical connections
- supporting equipment to be removed
- making electrical connections
- dismantling equipment to an appropriate level
- carrying out bonding
- covering (protecting) exposed components, wires, pipework or vents
- installing cable securing devices
- torque loading as required
- checking components for serviceability
- carrying out functional checks of the system
- ensuring that replacement components have the correct part numbers
- labelling (and storing in the correct location) components that require repair or overhaul
- setting, and adjusting/tuning replaced components (such as power output)
- applying bolt locking methods (such as split pins, wire locking, lock nuts)
Service/check aircraft cabin systems, to include carrying out three of the following:
- checking operation of interphone system
- checking operation of external communication system
- checking operation of passenger address system
- checking entertainment system
- checking active noise control system
- checking operation of audio and video monitoring system
Carry out three of the following types of test/check on aircraft cabin systems:
- continuity check
- built in test equipment (BITE) test
- signal-to-noise checks
- bonding tests
- distortion checks
- 'special-to-type' tests
- power output
Using two of the following:
8. 'special to type' test equipment
9. headset
10. multimeter
11. aircraft power source
12. bonding tester
13. external power source
Complete the relevant paperwork, to include one from the following and pass it to the appropriate people:
- job cards/work sheets
- aircraft cabin log
- computer records
- aircraft log book
- aircraft technical log
Carry out maintenance on aircraft cabin systems in compliance with one of the following:
- Civil Aviation Authority (CAA)/European Aviation Safety Agency (EASA)
- Extended Range Twin-Engine Operations Procedures (ETOPS) (where appropriate)
- Ministry of Defence (MoD)
- Military Aviation Authority (MAA)
- Aerospace Quality Management Standards (AS)
- Federal Aviation Authority (FAA)
- aircraft maintenance manual/approved change documentation (service bulletin)
- manufacturers standards and procedures
Scope Knowledge
Values
Behaviours
You will be able to apply the appropriate behaviours required in the workplace to meet the job profile and overall company objectives, such as:
- strong work ethic
- positive attitude
- team player
- dependability
- responsibility
- honesty
- integrity
- motivation
- commitment