Maintaining ice and rain protection systems on aircraft
Overview
This standard identifies the competences you need to carry out maintenance activities on aircraft ice and rain protection systems, in accordance with the approved aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements. It covers both fixed wing and rotary winged aircraft, and covers the units and components which provide a means of preventing or disposing of ice and rain on various parts of the aircraft. The maintenance activities will include the removal, fitting and testing of a range of ice and rain protection system components associated with aerofoil surfaces, air intakes and cowls, pitot static, windows and doors, antennas and radomes, propellers and rotors, water supply and drain lines, and ice detection and indicating systems. You will be expected to use the approved procedure for correctly isolating the system before breaking into the system circuit. You will remove the required components and fit approved replacements, as appropriate. You will then need to test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements.
Your responsibilities will require you to comply with the specific practices and procedures identified in the aircraft manual, change/service bulletin documentation and airworthiness requirements for the maintenance activities undertaken, and to report any problems with these requirements that you cannot personally resolve, or that are outside your permitted authority, to the relevant people. You must ensure that all tools, equipment and materials used are correctly accounted for on completion of the activities, and that all necessary job/task documentation is completed thoroughly, accurately and legibly. You will be expected to work with a minimum of supervision, taking personal responsibility for your own actions and for the quality and accuracy of the work that you carry out.
Your underpinning knowledge will provide a good understanding of your work, and will provide an informed approach to applying the appropriate maintenance techniques and procedures to aircraft ice and rain protection systems. You will understand the removal, fitting and testing methods and procedures, and their application, along with the ice and rain protection system maintenance requirements. You will know how the equipment functions, the common problems that can occur, the purpose of the individual components and associated defects, in adequate depth to provide a sound basis for carrying out the maintenance activities, correcting faults and for ensuring that the equipment is maintained to the required standard.
You will understand the safety precautions required when working on aircraft ice and rain protection systems, especially those involved with handling de-icing fluids. You will be required to demonstrate safe working practices throughout, and will understand your responsibility for taking the necessary safeguards to protect yourself and others in the workplace.
Notes:
- This standard is designed to cover the practical experience requirements of the Airline Transport Association (ATA) Chapter 30 Ice and Rain Protection.
- To display competence in this standard, it is necessary to both remove and fit aircraft ice and rain protection system components. You must remove components; however, you may fit a replacement component where the original was previously removed by another person. You should also be aware of how to leave a system in a safe condition if maintenance tasks cannot be completed. This covers both the physical systems and the job documentation.
Performance criteria
You must be able to:
- work safely at all times, complying with health and safety and other relevant regulations, directives and guidelines
- follow the relevant maintenance schedules to carry out the required work
- carry out the maintenance activities within the limits of your personal authority
- carry out the maintenance activities, and replace components in the specified sequence and in an agreed timescale
- report any instances where the maintenance activities cannot be fully met or where there are identified defects outside the planned schedule
- complete relevant documentation in accordance with organisational requirements
- dispose of waste materials in accordance with safe working practices and approved procedures
- leave the aircraft and system in a safe and appropriate condition, free from foreign object debris on completion of the activities
Knowledge and Understanding
You need to know and understand:
- the specific safety practices and procedures that you need to observe when working on aircraft ice and rain protection systems (including any specific legislation, regulations/codes of practice for the activities, equipment or materials)
- the need to check that cabin/cockpit switches, selectors and circuit breakers are in the correct position before applying any form of external power (such as electrical, hydraulic, air or vacuum)
- the importance of maintenance on ice and rain protection systems, and impact upon Extended Range Twin-Engine Operations Procedures (ETOPS) systems, Electrical Wiring Interconnect Systems (EWIS), legislation and local procedures
- the requirements and importance of understanding and applying human factors as defined by the regulatory requirements and the potential impact if these are not adhered to
- the hazards associated with carrying out maintenance activities on aircraft ice and rain protection systems, and with the tools and equipment used (such as the safe release of fluids, misuse of tools), and how to minimise them and reduce any risk
the protective equipment that you need to use for both personal protection (PPE) and protection of the aircraft
what constitutes a hazardous voltage and how to recognise victims of electric shock
how to reduce the risks of a phase to earth shock (such as insulated tools, rubber matting and isolating transformers)
the importance of aircraft husbandry and of ensuring that, throughout the maintenance activity, the aircraft and work area are maintained free from foreign objects, and the implications of FOD to the safety of the aircraft
- why tool/equipment control is critical, and what to do if a tool or piece of equipment is unaccounted for on completion of the activities
- how to extract and use information from aircraft manuals, log books, flight logs, charts, circuit and physical layouts, specifications, symbols used in aircraft ice and rain protection systems, and other documents needed in the maintenance activities
- how to carry out currency/issue checks on the specifications you are working with
- terminology used in aircraft ice and rain protection systems, and the use of system diagrams and associated symbols
- the various types of pipe and component that make up the aircraft ice and rain protection system (such as rigid pipes; air hoses; rubber de-icing boots; heating elements; valves; pumps; mechanical and electrical control devices)
- why electrical bonding is critical, and why it must be both mechanically and electrically secure
- the principles of operation of the ice and rain protection system being worked on (such as hot air, electrically heated elements, mechanically/pneumatic operated rubber de-icing boots, alcohol spray and water repellent systems; ice indication and warning)
- the techniques used to remove components from aircraft ice and rain protection systems without damage to the components or surrounding structure (such as release of fluids, removal of components and the need to protect the circuit integrity by fitting blanking plugs and labelling exposed circuits)
- the various mechanical fasteners to be removed and replaced, and their methods of removal and replacement (such as threaded fasteners, special securing devices)
- the various types of electrical connector that are used, methods of unlocking, orientation indicators and locating and locking-in of the connections
- the need to label and store correctly components that require repair or overhaul, and to check that replacement components have the correct part/identification markings and accompanying release documentation
- how to fit components into the circuit (such as ensuring the correct tightness of fastenings, fittings and pump connections; eliminating stress on pipework/connections; correctly making electrical connections; carrying out visual checks of all components)
- how to make adjustments to components/assemblies to ensure that they function correctly (such as flow settings, travel and working clearance)
- why securing devices need to be tightened to the correct torque, locked and labelled, and the methods to be used
- how to carry out routine checks and servicing of the aircraft ice and rain protection system (including checking for leaks, checking and changing filters, replenishing fluids, changing windshield wiper blades)
- the types of test to be carried out on the aircraft ice and rain protection system, and the test equipment to be used (such as testing operation of pitot, static and stall detectors)
- the methods and procedures to be used to carry out the various tests on the ice and rain protection system
- the importance of carrying out tests in the specified sequence, checking readings and movements at each stage
- how to record the results of each individual test and the documentation that must be used
- how to analyse the test results, and how to make valid decisions about the acceptability of the aircraft ice and rain protection system
- the procedures to be followed if the equipment or system fails to meet the test specification
- the recording documentation to be completed for the activities undertaken and, where appropriate, the importance of marking and identifying specific pieces of work in relation to the documentation
- the procedure for the safe disposal of waste materials and scrap components
- the extent of your own authority and to whom you should report if you have problems that you cannot resolve
Scope/range
Scope Performance
Carry out all of the following during the maintenance of the aircraft ice and rain protection systems:
- ensure that appropriate authorisation to work on the aircraft is obtained, and observe all relevant isolation and safety procedures
- obtain and use the correct documentation (such as job instructions, technical instructions, aircraft manuals and maintenance documentation)
- obtain the correct tools and equipment for the activity, and check that they are in a safe, tested and usable condition and within current calibration dates
- adhere to procedures or systems in place for risk assessment, COSHH, personal protective equipment and other relevant safety regulations and procedures to realise a safe system of work
- ensure that the system is safely isolated and where appropriate, drain off fluid before breaking into the system
- ensure that the relevant safety devices and mechanical/physical locks are in place (where appropriate)
- use approved removal, fitting and testing techniques and procedures at all times
- return tools and equipment to the correct storage location on completion of the activities
- ensure that work carried out is correctly documented and recorded
- ensure that any outstanding tests are correctly documented
Carry out maintenance on two of the following parts of the aircraft ice and rain protection systems:
- aerofoil surfaces
- propellers/rotors
- antennas/radomes
- air intakes/cowlings
- windows/windshields
- water supply and drain lines
- pitot static
- doors
- ice detection and indicating
Carry out maintenance on ice and rain protection systems operated by two of the following:
- mechanical/pneumatic actuation
- hot air
- alcohol spray
- electrically heated elements
Remove and fit four different aircraft ice and rain protection components (at least one must be from group A):
Group A
1. pump
2. solenoids
3. wiper motor
4. manifold
5. wing heaters
6. pitot probes/pressure heads
7. valves (such as check, de-icing, distributing)
8. heated windshields
9. pitot heaters
10. pressure regulator
11. nozzles (air or fluid)
12. scoop heaters
13. fluid reservoirs/tanks
14. water line heaters
15. ice detectors
16. rubber de-icer boots
17. electrical elements
Group B
18. windshield wipers
19. pipes and hoses
20. moisture drains/traps
21. sensors/transmitters
22. air filters
23. wiring/switches/plugs
24. timers
25. gauges
26. temperature probes
27. electrical probes
28. other specific components
Carry out fifteen of the following maintenance activities:
- removing access panels and covers to expose components to be removed
- carrying out fault diagnosis and system checks
- preparing the system for maintenance (such as isolating, draining fluids)
- disconnecting electrical connections
- refitting components in the correct position, orientation and alignment
- removal of bonding
- disconnecting/removing hoses and pipes
- setting and adjusting replaced components
- removing mechanical fasteners and securing devices
- making mechanical connections
- supporting equipment to be removed
- making electrical connections
- dismantling equipment to an appropriate level
- carrying out bonding
- covering (protecting) exposed components, wires, pipework or vents
- torque loading as required
- replenishing fluids
- checking components for serviceability
- carrying out system functional checks
- replacing damaged/defective components
- replacing single use items such as seals, gaskets
- ensuring that replacement components have the correct part numbers
- fitting blanks, labelling (and storing in the correct location) components that require repair or overhaul
- applying bolt locking methods (such as split pins, wire locking, lock nuts)
- carrying out area inspections prior to task close down
Service/check aircraft ice and rain protection systems, to include carrying out all of the following:
- checking the system for leaks
- replacing filters
- replenishing fluids (such as de-icing, rain repellent)
- checking and adjusting spray nozzles
- checking the operation of pitot, static and stall detection heating elements
- changing windshield wiper blades (as appropriate)
- checking indicating systems
Carry out three of the following tests on the aircraft ice and rain protection systems:
- leak test
- reduced system test
- pressure test
- built in test equipment (BITE) test
- system charging
- `special-to-type' tests
Using one of the following:
7. aircraft pumps
8. ground test rig
9. aircraft electrical power
Complete the relevant paperwork, to include one from the following and pass it to the appropriate people:
- job cards/work sheets
- computer records
- aircraft technical log
- aircraft cabin log
- aircraft log book
Carry out maintenance on aircraft ice and rain protection systems in compliance with one of the following:
- Civil Aviation Authority (CAA)/European Aviation Safety Agency (EASA)
- Extended Range Twin-Engine Operations Procedures (ETOPS) (where appropriate)
- Ministry of Defence (MoD)
- Military Aviation Authority (MAA)
- Aerospace Quality Management Standards (AS)
- Federal Aviation Authority (FAA)
- aircraft maintenance manual/approved change documentation (service bulletin)
- manufacturers standards and procedures
Scope Knowledge
Values
Behaviours
You will be able to apply the appropriate behaviours required in the workplace to meet the job profile and overall company objectives, such as:
- strong work ethic
- positive attitude
- team player
- dependability
- responsibility
- honesty
- integrity
- motivation
- commitment