Set up and control case making machinery

​

This standard is for print finishers using case making equipment. They will be expected to set up the equipment and control it whilst running production jobs.

This standard consists of two elements:

• Set up case making machinery
• Run case making machinery and monitor quality

This is what the standard covers:

1. identifying the job requirements
2. checking that case making machinery is working properly
3. checking that safety devices are working properly
4. running the case making machine safely
5. adjusting settings, where necessary to maintain the required standard
6. checking that work meets the required standard
7. identifying faults and taking action to deal with them
8. unloading and stacking the finished product.

​

Set up case making machinery

1. check that you have all the details you need for the job
2. check that you have enough materials of the right type for the job to meet job requirements
3. report if the materials provided are not correct or sufficient in accordance with organisational procedures

4. set up the case making machine in accordance with organisational requirements:
   boards, hollows and cover material transfer from feeders squarely and evenly
   glue is applied evenly at the correct temperature
   cover material is turned in evenly and squarely onto boards
   cases are delivered from the machine without damage or distortion

5. check that a sample produced by the machine matches the required standards

6. make any necessary adjustments to enable standards to be met
7. report if standards cannot be met in accordance with organisational procedures
8. prepare your work area so that it is safe and ready for production
   * 
   ***Run case making machinery

**
9. run case making machinery so that it is safe and efficient and at the required speed in accordance with organisational procedures
10. keep up sufficient supplies of materials so that runs continue as long as necessary to meet job requirements
11. check at regular intervals that your company's quality standards are met
12. identify the causes of faults in production which result in:
blistering of cover material
uneven turn-ins
turn-ins not tight
cover boards not parallel with each other
cover material not adhering to boards

13. adjust machines, using approved methods and equipment, to correct faults which it is your job to remedy
14. use agreed procedures to report faults which it is not your job to correct
15. check that machinery is safe to operate, once faults have been corrected, in accordance with organisational procedures
16. record the production and quality assurance details ensuring information meets organisational procedures
17. follow the organisational procedures for the removal of waste
18. stack work using the approved method

​

1. your duties and responsibilities for health and safety as defined by any specific legislation covering your job role
2. regulations such as those covering manual handling, noise at work, personal protective equipment, safe handling of equipment and materials, and the safe use of computer equipment
3. workplace policies and written operating procedures relating to written health and safety policy statement, provision, use and processes of workplace equipment, training, prohibited equipment, young persons, safe systems of work
4. the way you actually do your job, more particularly the activities and techniques and the way that materials and equipment are used
5. typical hazards and risks in the printing industry and those that relate to your own job
6. risk assessment techniques and the action to take to deal with them
7. codes of practice relevant to your role and where to obtain information on them
8. manufacturers' and suppliers' health and safety instructions and advice for operating machinery, guarding machinery and data sheets for substances harmful to health
9. the requirements for personal presentation including personal hygiene, suitable clothing and accessories, fitness for work, such as not under the influence of drugs, alcohol or medication, smoking policies in the workplace
10. how to stop a machine in the event of an emergency
11. the purpose of case making
12. the information and materials required to meet job specification
13. safety devices found on case making machinery, their purpose and how to check they are functional
14. how to set up and adjust case making machinery to meet job requirements
15. the causes of common faults and how to rectify them including blistering of cover material, uneven turn-ins, turn-ins not tight, cover boards not parallel with each other, cover material not adhering to boards
16. the causes of faults with raw materials, processes and machinery used in your business and how to identify and treat them
17. techniques for controlling quality including inspection, testing, sampling and use of input and output controls
18. the impact that faults, in the process you are involved with, have on later processes and the quality of the end product
19. types of problems that may need to be solved including machinery - electrical, mechanical, electronic, settings, component wear and tear, consumables needing replacement, materials - defects, shortages, incompatibility, systems, organisation and lack of skills or knowledge
20. sources of information for solving problems including manufacturer's documentation / troubleshooting guides, colleagues, tutors / trainers / mentors and reference material – in house or external, such as the internet
21. techniques for assessing machine faults including observation, listening, inspection of product, reports from colleagues / log reports, touch or smell (if safe to do so) and testing, such as electrical, mechanical, electronic
22. the types of paper, board and other commonly used substrates including commonly used uncoated, coated, embossed papers and boards
23. the grammage, thickness, opacity, brightness/whiteness, strength, dimensional stability, gloss of paper, board and other commonly used substrates
24. how to maintain the quality of materials and protect them from damage, humidity and temperature during storage and handling
25. how to label and identify materials