Set out, operate and remove signing, lighting and guarding for highway works Legacy

This Standard is about setting out, operating and removing signing, lighting and guarding equipment for highway works.
It includes setting out, erecting and dismantling protection equipment, positioning, maintaining, adjusting and dismantling traffic control equipment and controlling traffic equipment.
This Standard could apply to anyone who sets ups and operates signing, lighting and guarding for highway works.

---

1. use relevant work instructions and specifications to identify signing, lighting and guarding required to meet safety and security requirements
2. set out and erect protection equipment in accordance with relevant codes of practice
3. check the position and condition of protection equipment meets work requirements and is in accordance with relevant codes of practice
4. position, maintain and control traffic control equipment in accordance with work requirements, relevant codes of practice
5. adjust traffic control equipment in line with the progress and changes of the work activity
6. report defective and damaged equipment to appropriate people
7. identify any issues caused by the work environment with signing, lighting and guarding practice in accordance with relevant codes of practice
8. remove protection equipment and traffic control equipment in accordance with relevant codes of practice
9. refer problems and conditions outside your responsibility in accordance with approved procedures and practices
10. carry out work in line with approved procedures, codes of practice and statutory requirements

---

1. appropriate signing, lighting and guarding for width of road, speed of road, traffic count, street furniture and duration of work
2. the appropriateness of signing, lighting and guarding methods to meet code of practice requirements
3. the purpose of equipment used for protecting highways works, including signs, lights, guards and portable traffic signals
4. the different types of traffic control equipment including warning signs, priority signals, stop and go boards, portable traffic lights
5. the types of guards and traffic control equipment used to protect highways works and their positioning requirements relative to the work
6. how to position and operate traffic controls including warning signs, priority signals, stop and go boards, portable traffic lights
7. how to follow instructions to ensure the correct sequences for erection and dismantling of traffic control arrangements
8. the importance of cleaning signs and lights in the immediate work area during the course of highways works
9. the importance of checking and reporting defects in signs, guards, lighting, and traffic control systems to the team leader
10. environmental issues with work taking place including public safety, school traffic, changing conditions such as work extending into darkness and consideration of impact on excessive traffic and pollution.
11. the importance of complying with safety and procedural instructions
12. the range and purpose of personal protective equipment used during highways works
13. the importance of checking and reporting defects in personal protective equipment to the team leader
14. legislation, codes of practice, procedures and practices for health, safety and the environment that is relevant to your work in signing, lighting and guarding
15. the actions to take in the event of an accident or emergency on the highway
16. procedures for summoning the emergency services
17. accident recording and reporting procedures

---

---

---

---

---

---

---

---

---

---

2

---

01 Dec 2021

---

Legacy

---

Original

---

Energy and Utility Skills

---

EUSNCO109

---

Engineering, Water Network Construction Operative, Water Network Construction Supervisor

---

8134

---

water, network, construction, signing, lighting, guarding

---