Prepare and demobilise water jetting equipment
Overview
This standard is about setting up, preparing and demobilising water jetting equipment, selecting, preparing and using materials, components, tools and associated equipment, interpreting information, and adopting safe, healthy and environmentally responsible work practices
This standard is for people working in the occupational area of Water Jetting and can be used by operatives, supervisors and managers
Performance criteria
You must be able to:
P1 interpret the given information relating to the work and resources to confirm its relevance
P2 comply with the given, relevant legislation and official guidance
to carry out your work and maintain safe and healthy work practices
P3 select the required quantity and quality of resources for the methods of work
P4 comply with organisational procedures to minimise the risk of damage to the work and surrounding area
P5 comply with the given contract information to carry out the work efficiently to the required specification
P6 complete the work within the allocated time, in accordance with the programme of work
Knowledge and Understanding
You need to know and understand:
Performance Criteria 1
Interpretation of information
K1 the organisational procedures developed to report and rectify inappropriate information and unsuitable resources, and how they are implemented
K2 the types of information, their source and how they are interpreted
K3 the organisational procedures to solve problems with the information and why it is important they are followed
Performance Criteria 2
Safe work practices
K4 the level of understanding operatives must have of information for relevant, current legislation and official guidance and how it is applied
K5 the types of fire extinguishers and how and when they are used
K6 how emergencies should be responded to and who should respond
K7 the organisational security procedures for tools, equipment and personal belongings
K8 what the accident reporting procedures are and who is responsible for making the report
K9 why, when and how health and safety control equipment should be used
K10 how to comply with environmentally responsible work practices to meet current legislation and official guidance
**
Performance Criteria 3**
Selection of resources
K11 the characteristics, quality, uses, sustainability, limitations and defects associated with the resource*s* and how defects should be rectified
K12 how the resources should be used and how any problems associated with the resources are reported
K13 the organisational procedures to select resources, why they have been developed and how they are used
K14 the hazards associated with the resources and methods of work and how they are overcome
Performance Criteria 4
Minimise the risk of damage
K15 how to protect work from damage and the purpose of protection
K16 why disposal of waste should be carried out safely and how it is achieved
Performance Criteria 5
Meet the contract specification
K17 how methods of work, to meet the specification, are carried out and problems reported
K18 how maintenance of tools and equipment is carried out
Performance Criteria 6
Allocated time
K19 what the programme is for the work to be carried out in the estimated, allocated time and why deadlines should be kept
Scope/range
Performance Criteria 1
1 interpretation of drawings, specifications, schedules, method statements, risk assessments, current legislation, Codes of Practice, operating instructions and manufacturers' information related to the work to be carried out
Performance Criteria 2
2 avoidance of risk by complying with the given information relating to the following
2.1 methods of work
2.2 safe use of health and safety control equipment
2.3 installing and maintaining safety measures for the working area
2.4 safe use, storage and handling of materials, tools and equipment
2.5 specific risks to health
Performance Criteria 3
3 selection of resources associated with own work
3.1 materials
3.2 tools and equipment
Performance Criteria 4
4 protection of the work and its surrounding area from damage
5 maintain a clear and tidy work space
6 disposal of waste in accordance with current legislation
**
Performance Criteria 5**
7 demonstration of work skills to fit, position, secure, connect and adjust
8 use and maintain hand tools, portable power tools and ancillary equipment
9 carry out pre-start checks and prepare water jetting equipment to given working instructions relating to
9.1 siting of equipment
9.2 connecting hoses, lances, guns and safety equipment
9.3 power supply
9.4 water supply
10 demonstration of work skills to start, stop and control
11 operate and monitor water jetting equipment to given working instructions, relating to
11.1 tests runs
11.2 close down
11.3 clean down
12 on completion of work dismantle and decontaminate equipment and make working area safe
Performance Criteria 6
10 completion of own work within the estimated, allocated time to meet the needs of other occupations and/or client
Scope Performance
Scope Knowledge
Disposal of waste
1 environmental responsibilities, organisational procedures, manufacturers' information, statutory regulations and official guidance
Emergencies
2 operative's response to situations in accordance with organisational authorisation and personal skills when involved with
2.1 fires, spillages, injuries
2.2 emergencies relating to occupational activities
Fire extinguishers
3 water, CO2, foam, powder and their uses
Hazards
4 those identified by risk assessment, methods of work, manufacturers' technical information, statutory regulations and official guidance
Health and safety control equipment
5 identified by the principles of prevention for occupational use, types and purpose of each type, work situations and general work environment
5.1 collective protective measures
5.2 personal protective equipment (PPE)
5.3 respiratory protective equipment (RPE)
5.4 local exhaust ventilation (LEV)
Information
6 drawings, specifications, current legislation, schedules, method statements, risk assessments, Codes of Practice, manufacturers' information and operating instructions and official guidance
**
Legislation and official guidance**
7 this relates to the operative's responsibilities regarding potential accidents, health hazards and the environment whilst working in the workplace, below ground level, in confined spaces, at height, with tools and equipment, with materials and substances, with movement and storage of materials by manual handling and mechanical lifting
Maintenance
8 operative care of hand tools, portable power tools and equipment
Methods of work
9 application of knowledge for safe and healthy work practices, procedures and skills relating to the method and area of work and materials used to
9.1 carry out pre-checks, set up and shut down equipment
9.2 operate equipment
9.3 monitor and assess performance of pump unit, hoses, lances, guns, nozzles and control valves
9.4 dismantle equipment
9.5 provide information for Building Information Modelling (BIM)
9.6 recognise and determine when specialist skills and knowledge are required and report accordingly
9.7 determine specific requirements for structures of special interest, traditional build (pre 1919) and historical significance
9.8 identify and follow the installation quality requirements
9.9 work with, around and in close proximity to plant and machinery
9.10 direct and guide the operations and movement of plant and machinery
9.11 use hand tools, portable power tools, water jetting equipment: automated or semi-automated systems, and ancillary equipment
9.12 work at height
9.13 use access equipment
10 team work and communication
11 needs of other occupations associated with preparing and demobilising water jetting equipment
**
Problems**
12 those arising from information, resources and methods of work
12.1 own authority to rectify
12.2 organisational reporting procedures
Programme
13 types of progress reports, timetables and estimated times
14 organisational procedures for reporting circumstances which will affect the work programme
Protect work
15 protect work against damage from general workplace activities, other occupations and adverse weather conditions
Resources
16 materials, components and equipment relating to types, quantity, quality, sizes and the sustainability of standard and/or specialist
16.1 water, abrasives, chemicals
16.2 fuel, lubricants, coolants
16.3 pump units, hoses, lances, guns, nozzles, control valves and safety equipment
16.4 hand tools, portable power tools, water jetting equipment: automated or semi-automated systems, and ancillary equipment
17 confirm resources and materials to conform with the specification
18 methods of calculating quantity, length, area, pressure drop, back pressure, reaction force and wastage of materials associated with the method and procedure to prepare and demobilise water jetting equipment
Security procedures
19 site, workplace, company, operative and vehicles